Send E-mail
Send SMS
Semitrone Conchem Private Limited
Semitrone Conchem Private Limited
Navrangpura, Ahmedabad, Gujarat
Send E-mail
Send SMS
Our Products

SEMITRONE NSA 44Yes! I am interested

Polymer Modified Multipurpose Tile Adhesive

Polymer modified pre-packed adhesive for multipurpose application. N. S. A. - 44 is a non-shrink adhesive, self curing and having excellent waterproofing properties. It is specially made for Interior cladding of Ceramic Tiles, Vitrified Tiles, Mosaic Tiles & Plaster Work.


- Highly cost effective

- Easy to work for various application

- Ideal for any cementitious surface to fix new Ceramic, Vitrified and cementitious tiles.

- Improves strength & gives Strong and Durable bonding with surface

- Self curing properties

- It gives 100 % Waterproofing properties

- Can be used for Interior and Exterior

- Can be used for Tile on Tile (Only on cementitious surface)

- Ideal for Mass Tiles fixing and Plaster work


u Add Semitrone N. S. A. - 44 to clean water and mix until a smooth slump free consistency produced or as per recommended ratio, avoid excess water

u After mixing spread the adhesive paste on the background immediately. Spread only adhesive mix that can be fixed within 20 minutes

u Push tile firmly on the background ensuring that good contact is maintained with the back of each tile

u Maxbond AR - 40 admixture may be used in conjunction with Semitrone N. S. A. - 44 to impart flexibility, enhance adhesion and durability and reduce water permeability

u Allow adhesive to dry before grouting


u Base Polymer modified cementitious

u Colour Grey

u Mixing Ratio 1 3 or 1 1.5

u Bed thickness 5 to 6 mm

u Coverage 2 to 2.5 Sq. Feet / 1 Kg

u Application Use notched trowel

u Setting tile 12 to 14 Hours

u Temp 25 Degree to 100 Degree c

u Safety Protect from damp

MAX AR 40Yes! I am interested

Acrylicbased Waterproofing Compound, Bonding Agent & Liquid Additive for Grout & Mortars

MAX AR - 40 is an acrylic polymer emulsion that has been specifically formulated for the addition to” “SEMITRONE” brand Tiles Adhesives, Glass Mosaic Adhesives & MAX JOINT FILLER (GROUT). This admixture will significantly improve the bond strength; provide higher density resistance to thermal shock and flexibility of adhesives & grouts. Because of its acrylic base, this liquid can enhance a grout’s appearance through better colour retention and less fading caused by ultraviolet rays.



· Increases durability & high bonding.

· Increases flexibility & tensile strength

· Reduces staining.

· It is excellent for grouting tiles with high absorptive levels about 7 % or better.

· Increases weather resistance of grout.


· Any Non-Shrink Adhesives (N. S. A. / GMA) & Mortar

· Toppings, patches and leveling courses

· Max Joint Filler (White or Coloured grout)

· Max Stone Filler (White or Coloured grout)


Pour 2 liter of MAX AR - 40 with 4 liter of clean water into a clean container. Add the “SEMITRONE” brand Tiles Adhesives, Glass Mosaic Adhesives powder slowly continuously mixing until a smooth toothpaste consistency is achieved. Allow to stand for 3-5 minutes. Re-stir. The product is now ready to use. You can also use MAX AR - 40 as a total water replacement in the Tiles Adhesives, Glass Mosaic Adhesives.


MAXHARD HD - MYes! I am interested


MAXHARD HD - M is a dry shake, metallic floor hardener with graded iron aggregate in a high strength cementitious binder. Designed to be incorporated into fresh concrete slabs, It provides a dense, tough surface capable of with standing the abrasion and impact loading seen by floor slabs of numerous industrial and manufacturing facilities. MAXHARD HD - M has been specially formulated with a non-rusting aggregate for increased abrasion resistance in areas subject to frequent moisture or water exposure.


- Provides a high strength wearing surface in areas subject to constant or

frequently wet conditions without oxidizing.

- Gives up to 6 times the abrasion resistance of plain, cured concrete.

- Iron aggregate is free of rust, oil, or other contaminants.

- Dense surface resists penetration of oil, grease, and many other liquids.

- Virtually non-dusting in service.

- Easy to clean and maintain

- Economical to own over the life of the floor.

- Can be applied at coverage rates up to 5 to 12 kg/m

- Available in 5 standard colours.

Primary Applications

- Industrial floors

- Loading docks

- Warehouses

- Main, high traffic aisleways

- Processing plants

- Passenger and freight terminals

- Distribution centers

Standard Colours

French Gray, Black, Brick Red, Tera Cotta, Green. The final finish can be any texture normally achievable with concrete and should be specified by the owner.

Application Tips

Colored (pigmented) dry shakesrequire special attention for a uniform colour. Care should be taken with regard to the following; delay application of the shake as long as possible to get the maximum colour saturation at the surface of the slab, apply the shake as evenly as possible and in two applications for maximum uniformity, do not burnish trowel the floor. Best appearance is achieved by hand trowelling the final finish.

Curing and Sealing

Curing and sealing MAXHARD HD-M may be done with either a MAXROTH CHEMICALS water based or solvent based MAXCURE, or cure and seal. Each has its own advantages and unique properties. Consult the individual technical data sheet for each curing and sealing product or contact your Maxroth Chemical Company representative for a recommendation regarding your specific project.

Technical Details

Colur French Gray, Black, Brick Red, Tera Cotta, Green

Hard Aggregate (Aluminium Oxide) 50 %

Iron Particles As per IS standard

Compressive Strength as per IS 516 - 1959

# 60 N/mm to 70 N/mm

Max Wall Life PuttyYes! I am interested

Highly Polymer Modified & Water Resist, White Cement based Putty for Exterior and Interior Surface

MAX WALL LIFE PUTTY is highly modified white cement based putty manufactured from high performing special graded, tested imported ingredients, binders and polymers for obtaining excellent results. MAX WALL LIFE PUTTY gives highly water resist, excellent bond; durable and extra smooth finish with very good coverage and less consumption of paint.




Max Micro ConcreteYes! I am interested

General purpose, High Tensile, Non - shrink Cementitious Micro Concrete

MICRO CONCRETE is a ready to use non - shrink, high strength, free flowing repair mortar which requires only the site addition of clean water. MICRO CONCRETE is based on OPC, graded aggregates, binders, fillers and additives which impart controlled expansion characteristics in the plastic state, while minimising water demand. For high early strength and long-term durability required low water consumption. For larger repairs, the mixed MICRO CONCRETE may be modified by the addition of 5mm to 12mm clean, dry graded aggregates on site. It compiles to BS 4551 - 80 & ASTM C 827 – 1987



·         Interior and exterior

·         Structural repairs

·         Parking & Bridge decks, Industrial floors, etc.

·         Leveling and repair of horizontal concrete and masonry surfaces



·         Polymer modified Pre - packed and ready to use

·         Easier placing, better compaction and finishing

·         Lower water requirement for given workability

·         Excellent adhesion and durability

·         Achieved High ultimate strength

·         Can be pumped and poured in to restricted area

·         Chloride free



·         Form : Powder

·         Wet Density : 2100 - 2200 kg/m³

·         Compressive Strength : 50 N/mm² @ 28 days

·         Tensile strength : 2.0 N/mm² @ 28 days

·         Flexural strength : 5.0 N/mm² @ 28 days

·         Expansion Characteristics : 1 to 4 %

·         W/P ratio : 0.16




·         25 kg bag of Max Micro Concrete will yield approximately 13 liters. Actual yield will depend upon the consistency of Max Micro Concrete and Quantity of coarse aggregate added.



Max Joint FillerYes! I am interested

MAX JOINT FILLER is a blend of specially selected cements, fillers, high grade pigments and synthetic organic polymers. It is polymer modified highly water resist, peel proof and crack proof tile joint filler available in more than 36 attractive colours. Suitable for up to 4 mm width.

It compiles to BS 5385




v Can be used for filling joints of various kinds of tiles and stones

v Easy to use and consistent in quality

v Highly water resist & peel proof

v Highly stain resistance/ Acid proof

v High damp resistance

v Available in attractive colour range


Areas of application 


v Ideal for all kind of joints in Walls & Floors

v Bathrooms & Swimming pool etc.

v Ideal for Kota, Marble & Granite Flooring


Technical specifications


Density: Wet: 1.85 kg/ltr Dry: 1.78 kg/ltr

Compressive Strength: 31.33 N/mm² @ 28 days

Flexural Strength: 3.21 N/mm² @28 days

Working Time: 30 minutes

Curing: minimum 48 hours

Mixing Ratio: Approx 0.32 to 0.34 % by weight of joint filler i. e. 1.6 to 1.7 liter water per 5 kg joint filler.

How to use


v Tile joint must be clean, free from any dust or other contaminates.

v Fill the joints after minimum 24 hours from tile fixed with chemical.

v Mix joint filler and water in 3 : 1 ratio

v Wait for ten minutes for proper chemical action.

v Fill the joint properly.

v Clean the extra joint filler from tile surface with wet cotton cloth after 1.5 hours.

v Clean the joints with dry cotton cloth after 24 hours.




Available in 500 gm, 1 kg (Pouch & Jar) & 10 kg bag.

NOTE: Price may vary depending on the requirement of quantity.

Cement AdmixtureYes! I am interested
We are manufacturer of Admixture in Ahmedabad, Gujarat. Naphthalene based super plasticizer.

Our brand Name is Max Plast 225
Welcome to

Semitrone Conchem Private Limited

  • Nature of BusinessManufacturer
  • Total Number of Employees26 to 50 People
  • Legal Status of FirmProprietorship Firm
  • Annual TurnoverRs. 10 - 25 Crore
  • GST No.24AAZCS8318P1Z9

An ISO 9001: 2000 certified company, Semitrone products are designed for excellent performance. Controlled by extremely skilled professionals, all the production processes are in line with strict quality norms. Have India’s well known reputed projects done and understanding of supply to well known organizations. Also have understanding of supply with several of the construction companies who believe in quality only. We offer tested product from number of Government approved Institutes and Laboratories like Nirma Institute of Technology, National Test House, and V. J. T. L. and K. C. T. Laboratories etc.


The Indian construction company has grown enormously in the last few years. Responding to the ever growing demands of this industry, the company keeps in touch with latest innovations and technologies. Being constantly in line with the emerging trends, the company is able to maintain global standards like IS, BS, DIN & ASTM.



We are India’s First High Strength Mono Component BS 5980: 1980 Glass Mosaic Adhesive Company. We have recently launched PolyCarbo. based Admixtures for any kind of concrete. We are also leading manufacturer of 100 % pure epoxy based products “SEMITRONE” Triple System Water Wipe Able Epoxy Joint Filler, Epoxy Coatings & Floorings.




Send SMS
Semitrone Conchem Private Limited
Mukesh Shah
2nd Floor, Neelmani Chambers
Navrangpura, Ahmedabad - 380009 , Gujarat , India
Send E-mail
Share Us: